Building of a "Multiplex Easy Glider"

Building of a
Multiplex Easy Glider

Model Kit the
Multiplex Easy Glider #21 4205

Now to add the servos to wings.
First I had to use a little CA to the servo recess,
just enough to glue the bottom surface of the servo only.
At the same time feed the servo wire into the recess
then run the wire in the area for the Carbinfiber
tube for wing reinforement. I also had to use a
24 inch servo extense cable to reach the receiver.

Next, step #4,
Putting all the parts together

Click Here